BlueSound Wireless Subwoofer Speaker Link
With the RT100 you can pair any subwoofer with the PULSE SOUNDBAR and allow the soundbar to focus on the mid and high-range dynamics of your favorite movie and music soundtracks. The RT100 uses point-to-point wireless technology to connect the PULSE SOUNDBAR to your existing subwoofer without the hassle of messy cabling. Plus, as a full-range device and both a transmitter and receiver, you can use two RT100s and wirelessly connect any Gen 2 Bluesound Player with an active subwoofer or speakers – no speaker wire needed.
SPECIFICATIONS
INPUTS
USB
2.0
USB Power Port required (not included)
Analog
1 x 3.5mm (Stereo, 3-Pole)
OUTPUTS
Analog
1 x 3.5mm (Stereo, 3-Pole)
FEATURES
Sample Rate
48kHz
THD+N
≤0.005% @2V 1kHz input
Signal to Noise
≥90dB @2V 1kHz input
Analog Output Level
2V
Frequency Response
20Hz to 20kHz ±0.5dB
Audio Latency
< 18ms
RF Band
Triband (auto switching)
Transmission Range
10m (line of sight)
With the RT100 you can pair any subwoofer with the PULSE SOUNDBAR and allow the soundbar to focus on the mid and high-range dynamics of your favorite movie and music soundtracks. The RT100 uses point-to-point wireless technology to connect the PULSE SOUNDBAR to your existing subwoofer without the hassle of messy cabling. Plus, as a full-range device and both a transmitter and receiver, you can use two RT100s and wirelessly connect any Gen 2 Bluesound Player with an active subwoofer or speakers – no speaker wire needed.
SPECIFICATIONS
INPUTS
USB
2.0
USB Power Port required (not included)
Analog
1 x 3.5mm (Stereo, 3-Pole)
OUTPUTS
Analog
1 x 3.5mm (Stereo, 3-Pole)
FEATURES
Sample Rate
48kHz
THD+N
≤0.005% @2V 1kHz input
Signal to Noise
≥90dB @2V 1kHz input
Analog Output Level
2V
Frequency Response
20Hz to 20kHz ±0.5dB
Audio Latency
< 18ms
RF Band
Triband (auto switching)
Transmission Range
10m (line of sight)
With the RT100 you can pair any subwoofer with the PULSE SOUNDBAR and allow the soundbar to focus on the mid and high-range dynamics of your favorite movie and music soundtracks. The RT100 uses point-to-point wireless technology to connect the PULSE SOUNDBAR to your existing subwoofer without the hassle of messy cabling. Plus, as a full-range device and both a transmitter and receiver, you can use two RT100s and wirelessly connect any Gen 2 Bluesound Player with an active subwoofer or speakers – no speaker wire needed.
SPECIFICATIONS
INPUTS
USB
2.0
USB Power Port required (not included)
Analog
1 x 3.5mm (Stereo, 3-Pole)
OUTPUTS
Analog
1 x 3.5mm (Stereo, 3-Pole)
FEATURES
Sample Rate
48kHz
THD+N
≤0.005% @2V 1kHz input
Signal to Noise
≥90dB @2V 1kHz input
Analog Output Level
2V
Frequency Response
20Hz to 20kHz ±0.5dB
Audio Latency
< 18ms
RF Band
Triband (auto switching)
Transmission Range
10m (line of sight)